Quality at work
+92 51 457 8047
marketing@smartpcbs.com

Quality Assurence

Design Rule Check

Whenever we receive your design we use Design Rule Check on the design file. It is basically the detailed analysis of your design, to verify its manufacturability and for checking required producti ...

E-Test

E-test is performed after fabrication of PCBs. Customers Gerber Data is used to perform E-test.  E-test is performed at the following ratio and specifications: Each multi layer PCB is ...

A.O.I. - Test

Automated Optical Inspection Machine scans master film and compares it with Gerber data files provided by customer. Each inner layer of a multi layer fabricated board is also inspected by comp ...

Solderability Test

Solderability test is performed to ensure that the quality of PCBs. Solderability test is performed on each and every job of Class III IPC 600G PCBs. In case of mass production a sample coupon ...

Peel and pull strength

Peal and pull strength testing is used to measure the bonding strength of tracks and through hole platting with base material. Peel strength is the average load per unit width of bond line required ...

Micro section Tests

Micro sectioning or coupon test is the cross sectional view of the PCB’s plated hole. It is performed on coupons of every job for Class III IPC 600G PCBs. Through hole copper coating, Tin cov ...

Bare Board Jig Tests

for large quantity of PCBs, E-test is not useful as it takes a lot of time and effort. To replace E-test, bare-board jig test is performed. Specially designed jigs are made to verify whether copper ...

Our E-Catalogue